How to Hide Dash Cam Wires

Wondering how to conceal those unsightly dash cam wires in your vehicle? You're not alone. Countless motorists seek ways to keep their car's interior neat and organized after installing a dash cam.

This article will guide you through simple and effective methods for hiding those cables, ensuring a clean and unobstructed view. Let's make your ride look sleek with these helpful tips!

Planning and Preparing for Hiding Dash Cam Wires

To begin hiding the wires of your dash cam, start by carefully planning the route you will take to conceal them. Gather all necessary tools and accessories such as adhesive wire clips and a trim removal kit before getting started.

Plan wiring route

Mapping out a cable route is the first step in efficiently hiding dash cam wires. Determine a pathway that starts from the dash camera, continues along the headliner towards your car's A-pillar, and down to your fuse box.

Keeping wires along less visible parts like between panels and beneath carpets helps maintain an organized appearance inside your vehicle. Be sure to choose a route that will not obstruct your view while driving for safety reasons.

This proactive planning reduces potential distractions and enhances overall aesthetics within the vehicle by neatly concealing power cords.

Gather necessary tools and accessories

To hide your dash cam wires effectively, you will need a few tools and accessories. Here's what you'll need:.

  1. Adhesive wire clips: These small clips can be attached to the interior panels of your vehicle to securely hold the wires in place.
  2. Trim removal kit: This kit comes with various tools that help remove the trim pieces without causing any damage. It makes accessing the hidden areas much easier.
  3. Electrical tape: Use electrical tape to secure the wires along their route and prevent them from coming loose or dangling inside your car.
  4. Suction cup for mounting: If your dash cam uses a suction cup mount, make sure it is clean and free from dust or debris for better adhesion.

Step-by-Step Guide for Hiding Dash Cam Wires

Tuck the wires along the headliner, guiding them down the trim piece and running them inside the dashboard for a clean and discreet dash cam setup.

Tuck wires along the headliner

To hide dash cam wires, one effective method is to tuck them discreetly along the headliner of your vehicle. This involves gently securing the wires under the lining, keeping them out of sight and neatly organized.

By carefully positioning the wires in this manner, you can maintain a clean and professional look inside your car while ensuring that they don't become a distraction or obstruct your view while driving.

Tucking the wires along the headliner is a simple yet effective way to achieve a stealthy dash cam setup.

Guide the wire down the trim piece

To hide your dash cam wire, you can guide it down the trim piece in your vehicle. Start by removing the black trim around the switches and use a screwdriver to remove any screws or snap out larger panels for easier access.

Once you have exposed the area, carefully feed the wire through the gaps and crevices along the trim piece. This will help conceal the wire and keep it neatly tucked away, maintaining a clean and organized look inside your car.

Run the wire inside the dashboard

To achieve a clean and discreet dash cam setup, one effective method is to run the wire inside the dashboard. This involves carefully routing the cable through the vehicle's interior, keeping it hidden from view.

By running the wire inside the dashboard, you can prevent any distractions while driving and maintain a neat appearance in your car. Remember to strategically choose the gaps and crevices in your vehicle's interior to feed the dash cam cable through for a seamless installation.

Concealing the wires inside the dashboard helps create a more organized and professional look, enhancing both aesthetics and safety on the road.

Connecting the power

To connect the power for your dash cam, start by locating a suitable power source in your vehicle. Many dash cams can be connected to the vehicle's fuse box or cigarette lighter socket.

Once you've identified the power source, carefully connect the positive and negative wires from your dash cam to the corresponding terminals of the power source. Use electrical connectors or crimping tools to ensure a secure connection.

It's important to follow proper wiring techniques and consult your vehicle's manual if needed. When connecting the power, make sure to avoid obstructing any other crucial wiring in your car.

Tips and Hacks for Easier Wire Hiding

Discover more tips and hacks for a seamless wire-hiding experience in our guide.

Use adhesive wire clips

To effectively hide your dash cam wires, adhesive wire clips are a game-changer. These handy accessories can be easily attached to the interior of your vehicle, providing a secure and neat way to route and conceal the cables.

Simply stick them onto the desired surface, such as the car's trim or headliner, and insert the wires into their designated slots. Adhesive wire clips not only keep your dash cam wiring organized but also prevent them from dangling or getting in your way while driving.

With these clips, you can achieve a clean and professional-looking installation without any hassle.

Utilize a trim removal kit

To make the process of hiding your dash cam wires easier, it's highly recommended to utilize a trim removal kit. This handy tool will help you safely remove the various panels and trims in your vehicle without causing any damage.

With a trim removal kit, you can easily access the areas where you need to hide the wires, such as behind switch panels or along the headliner. It typically includes different sizes and shapes of tools to accommodate different types of clips and fasteners commonly found in cars.

Using a trim removal kit will ensure that you can neatly conceal your dash cam wires while minimizing any potential scratches or dents on your vehicle's interior surfaces.

Remember, by using a trim removal kit, you'll have all the necessary tools at hand to carry out a professional-looking installation job that keeps those unsightly wires hidden from view.

Secure wires with electrical tape

To ensure a clean and secure installation, don't forget to use electrical tape to secure the dash cam wires. This will help prevent them from coming loose or getting tangled over time.

Simply wrap the tape tightly around the wires at different intervals along their length. Electrical tape not only provides added stability but also helps keep the wires neatly organized and hidden from view.

By taking this simple step, you can have peace of mind knowing that your dash cam setup is securely in place while maintaining a sleek and discreet appearance inside your vehicle.

Utilize a suction cup for mounting

To ensure a clean and discreet dash cam setup, you can utilize a suction cup for mounting. This allows you to easily attach the dash cam to your windshield without the need for permanent installation or drilling holes.

The suction cup provides a secure hold, keeping your dash cam in place while minimizing wire visibility. It's important to clean your windshield beforehand to ensure better adhesion of the suction cup.

By using this method, you can conveniently hide your dash cam wires and achieve a neat and professional look inside your vehicle.

Make sure to clean windshield for better adhesion

Clean your windshield thoroughly before installing your dash cam for better adhesion. A clean surface will help the adhesive mount stick more securely, ensuring that your dash cam stays in place while you drive.

Use a glass cleaner and a microfiber cloth to remove any dirt, dust, or grease from the windshield. Pay extra attention to areas where the adhesive will be applied, such as near the rearview mirror.

By taking this simple step, you can ensure that your dash cam is properly mounted and ready to capture clear and uninterrupted footage of your journeys.


Concealing dash cam wires is essential for a clean and professional-looking installation. By carefully planning the wiring route and utilizing tools like adhesive wire clips and trim removal kits, you can hide the wires along the headliner, inside the dashboard, and between panels for a discreet setup.

Properly hidden dash cam wires not only improve aesthetics but also prevent distractions while driving. Upgrade your dash cam experience by following these effective techniques to hide those pesky cables.


1. What does hiding dash cam wires involve?

Hiding dash cam wires involves concealing power cables in your vehicle, managing the cords and neatly routing them to minimize visibility.

2. How can I effectively hide my dash cam wires for a neat look?

You can effectively hide your dash cam wires by securing the wiring, tucking away excess length and disguising the cables within the car's interior components.

3. Are there easy ways to achieve a clean dash cam installation?

Yes! By using certain techniques such as wire management for dash cams and utilizing camouflage methods, you can have an easy and discreet setup of your dashcam.

4. Is it important to manage my dashboard camera power cords properly?

Yes, managing your dashboard camera power cords helps provide a neat look while also ensuring safety by reducing potential distractions or hazards caused by loose or visible wiring.

5. Can I conceal all types of connections related to my Dash Cam?

Most certainly! Apart from hiding main power cables, you can also work on concealing other connections like USB ports involved in your Dash Cam setup.

6. Where should I route my Dash Cam wiring for maximum concealment?

Routing options may vary depending on car models but generally, most people route their Dash Cam wirings around windshield edges under roof linings/panels or across floor carpets before connecting with respective plugs or sockets.